Feature:
1. Easy to Operate: dent puller kit provides a suitable platform for anyone to use as the accessories are not complicated at all. It is easy to pops a dent with the detailed repair steps described in the manual.
2. Widely Used: Paintless car dent remover can be applied to remove the dent from the car, as well as auto body creases and hail damage, effective for dents in the vehicle, refrigerators, washing machines, and other metal appliance. Saving time and money.
3. Working voltage: 100V-240V / 12V
4. Power: 20W

How to use the PDR tools:
1. Clean the dent and keep it dry
2. Take out the glue stick, and insert it into the glue gun, then wait for over 5 minutes
3. Take out a suitable glue tabs, and smear the glue on the tabs, quickly stick it on the surface of the dent, and keep on smearing glue on the surface, until the tabs is covered by the glue fully, after that, wait for over 10 minutes
4. Fasten the slide hammer with the tabs, and pull the hammer back, until the dent disappear
5. Vlean the surface with cleaning tools set
6. If the surface is convex, knock it slightly with knock down pen and hammer Repeatedly, until the surface is level
7. If the dent and convex surface are still existent, repeat the steps above, until you are satisfied with it

Package list:
Arc Crowbar x 1
M10 screw x 1
M10 nut x 1
M10 Handle Nut x 1
Puller adapter x 1
M8 Multi-directional stander x 1
Rubber Hammer x 1
Knock down pen with 9pcs pen heads x 1
Purple tabs x 24
Blue tabs x 18
Red tabs x 10
Hook rods x 3
Glue gun(US/EU/UK/Car Charger Plug) x 1, cable length: 1.4m, note: car cigarette lighter plug is 5m
Yellow glue sticks x 10
White glue sticks x 10
Towel x 1
Shovels x 2
Alcohol bottle（alcohol not include) x 1
Tool bag x 1
English manual x 1